Swing gates manufactured to your specifications
A swing gate is a well-known solution to close the entrance to a home or business site. A swing gate has 1 or 2 opening wings.
A swing gate is mounted on the wall of the driveway, or in the case of a free-standing swing gate, on bollards. When using a swing post, extra space must be provided next to the swing gate.
All our drive-in gates are sandblasted, metallized and finished with a thermoset polyester coating in a RAL color of your choice. Below is a selection of our finished swing gates. All these gates can be customized to fit your driveway.
Can't find what you are looking for? Contact us. We design, manufacture and install a tailor-made swing gate to your specifications.
The Amsterdam swing gate has a more traditional look. No sleek shapes, but decorative metal spikes.
Swing gate Amsterdam
The Athene swing gate consists out of a rectangular profile and door leaves with round bars.
Swing gate Athene
Barca is a double swing gate with a rectangular profile and perforated gate leaves that give a slightly see-through effect.
Swing gate Barça
Berlijn consists of a surface with vertical grooves within a larger frame. As usual, this gate can be adjusted to the client’s wishes with regard to automation, colour, etc.
Swing gate Berlijn
Double swing gate Den Haag’s angular design and thin vertical grooves give it a contemporary look.
Swing gate Den Haag
This gate consists out af flat aluminium gate leaves with rivets.
Swing gate Dortmund
The light wood gives this gate a fresh look. It adds colour and looks good with almost any house. The metal frame around the wooden planks completes the picture.
Swing gate Hamburg
This gate is particularly suitable for protecting companies. Naturally, you do not want intruders on your premises. The prongs on top of the gate make it impossible to climb. The frame consists of vertical steel tubes with a relatively large space between them but avoids people to squeeze through.
Swing gate Industrie
This gate has a streamlined design. The Keulen swing gate has a rectangular profile with pleated U-profile gate leaves. Its surface is covered in vertical slats with a small space between them.
Swing gate Keulen
Krakau is a double swing gate with one frame per wing, which is filled with horizontal tubes. A space was left between the tubes to give a see-through effect.
Swing gate Krakau
Our London swing gate consists out of horizontal tubes with 20mm spacing in between. A perforated plate connects the tubes in the middle. The arrangement varies with the gate height.
Swing gate Londen
Like Barca, Munchen also has perforated door leaves. The difference is that the middle row of door leaves is an ordinary equally surfaced plate.
Swing gate Munchen
The Napels swing gate is an attractive mix of a classic and a modern style. It's angular design is softened by the slight curve in the upper edge. The tubes in the top section are thinner than at the bottom, so that there is enough space at the top to look through them.
Swing gate Napels
Rotterdam has a very streamlined design. It's horizontal steel bars have a small gap between them.
Swing gate Rotterdam
Sofia has aluminium tooth groove profiles on the bottom and a steel lattice on top. This produces an attractive combination of traditional and modern elements.
Swing gate Sofia
Our Stuttgart gates consist of horizontal wooden planks in a a metal frame (15mm visible).
Swing gate Stuttgart
This 2-winged gate has a steel frame filled in with gate leaves.